Notice: Product Images may differ from the actual product. Image may be a representation of this item.
SRP Pro 4032 Chevrolet LS Gen III/IV Piston – 4.075 in. Bore – 1.300 in. CH, -5.00 CC
SKU: 325258L
SRP Pro 4032, Chevrolet, LS Gen III/IV, 4.075 in. Bore, 1.315 CD, Flat Top, Left Piston
SRP Professional pistons combine forged piston durability with modern performance technology for an extremely capable forged piston kit that doesn’t break the bank. Forged from 4032 aluminum, SPR Pro pistons experience minimal thermal expansion, making them perfect for a high-performance, reliable engine build from the track to the drag strip. All SRP Pro pistons include premium ring sets, wrist pins and locks. As with all JE Pistons products, SRP pistons are made 100% in the USA.
- Forged in the USA using 4032 aluminum, yielding tensile strength and minimal thermal expansion
- Proprietary Forged Side Relief (FSR) forging design minimizes friction and power loss with reduced skirt width and saves additional weight with a shorter wrist pin
- Low-friction skirt coating reduces wear and reduces operating noise while optimizing performance
- Includes high-quality wrist pins, locks, and JE Pro Seal premium piston rings
- Accumulator groove helps reduce pressure from combustion gases, reducing ring fluttering and improving ring seal for consistent power
- Made 100% in the USA
GTIN: 00193564255693
Piston Series | SRP Pro 4032 |
---|---|
Cylinder Head | LSX/L92 12 DEG |
Bore Diameter | 4.075 IN |
Piston Head Type | Flat |
Compression Height | 1.300 IN |
Piston Volume | -5.00 CC |
Piston Material | 4032 |
Forging Type | FSR |
Piston Orientation | Left |
Piston Average Weight | 443 GR |
Ring Set Included | Yes |
Top Compression Ring Thickness | 0.0480 IN |
Second Compression Ring Thickness | 0.0600 IN |
Oil Ring Thickness | 0.119 IN |
Wrist Pin Outer Diameter | 0.927 IN |
Wrist Pin Length | 2.250 IN |
Wrist Pin Wall Thickness | 0.150 IN |
Makes
Engines
Instructions: Enter a value in the un-shaded boxes below as they pertain to your engine.
Note: For pistons BELOW the block @ TDC – value in box must be a NEGATIVE number (-0.000)
Note: For pistons ABOVE the block @ TDC – value in box must be a POSITIVE number (0.000)
Note: For a DISH piston – value in box must be a NEGATIVE number (-0.0)
Note: For a DOME piston – value in box must be a POSITIVE number (0.0)
Note: Manipulate the DOME/DISH & PISTON to DECK volumes to get the ratio you want.