Notice: Product Images may differ from the actual product. Image may be a representation of this item.
JE, Arctic Cat, 92.00 mm Bore, 2 Cyl. Kit
Your Price: $524.99
SKU: 317193
Please Allow Approximately 3 Weeks or Less for Shipping
–
JE, Arctic Cat, 1000i Wild Cat, Prowler / TRV 1000, 10.50:1, 92.00 mm Bore, 2 Cyl. Piston Kit
As the leader in forged racing pistons, JE Pistons has applied over 75 years of experience to its carefully developed line of premium forged pistons for UTV engines. Engineered, forged and machined 100% in the USA, JE Pistons are designed for each specific engine and use application to provide the ultimate combination of durability and performance. Covering all popular models like Can Am Maverick X3, Polaris RZR, and more from closed course to open trail, JE Pistons’ performance has been proven to thrive in the high-load environments of UTV engines. Equip your SxS with the best in forged pistons.
- Forged in the USA using 2618 aluminum, yielding high tensile strength needed for high-demand performance applications
- Designed specifically for each engine and use application to provide optimized performance durability
- Proprietary Forged Side Relief (FSR) forging design minimizes friction and power loss with reduced skirt width and saves additional weight with a shorter wrist pin
- Includes high-quality wrist pins, locks, and JE Pro Seal premium piston rings
- Made 100% in the USA
GTIN: 00193564029287
Piston Series | JE Pistons |
---|---|
Cylinder Head | ARCTIC CAT |
Bore Diameter | 92.00 MM |
Compression Ratio Actual | 10.50:1 |
Piston Head Type | Dish |
Piston Volume | -6.20 CC |
Piston Material | 2618 |
Forging Type | FSR |
Piston Average Weight | 293 GR |
Ring Set Included | Yes |
Top Compression Ring Thickness | 0.0400 IN |
Second Compression Ring Thickness | 0.0480 IN |
Oil Ring Thickness | 0.111 IN |
Wrist Pin Material | 9310 Nickel Carbon Steel Alloy |
Wrist Pin Length | 2.050 IN |
Wrist Pin Wall Thickness | 0.160 IN |
Years
Makes
Models
Instructions: Enter a value in the un-shaded boxes below as they pertain to your engine.
Note: For pistons BELOW the block @ TDC – value in box must be a NEGATIVE number (-0.000)
Note: For pistons ABOVE the block @ TDC – value in box must be a POSITIVE number (0.000)
Note: For a DISH piston – value in box must be a NEGATIVE number (-0.0)
Note: For a DOME piston – value in box must be a POSITIVE number (0.0)
Note: Manipulate the DOME/DISH & PISTON to DECK volumes to get the ratio you want.