JE Ultra Series Harley Milwaukee-Eight Piston Kit, 2618, Dish, 4.250 in. Bore, 1.080 CD, -4.30 CC, 11.25-1
Your Price: $695.99
SKU: 391731
JE Ultra Series Harley Milwaukee-Eight Piston Set, 2618, Dish, 4.250 in. Bore, 4.500 in. Stroke, 1.080 CD, -4.30 CC, 11.25-1, Set of 2
As the leader in forged racing pistons, JE Pistons has been at the forefront of V-Twin and Harley-Davidson piston performance for decades, with over 75 years of experience. JE’s carefully developed line of V-Twin pistons is engineered, forged and machined 100% in the USA and are designed for each specific engine and use application to provide the ultimate combination of durability and performance. From fun and powerful cruisers to all-out V-Twin drag racing, JE Pistons’ performance is proven with every handful of throttle. Equip your bike with the best in forged pistons.
- Ultra Series Forging
- Ceramic Crown Coating
- Skirt Coating
- Lateral Gas Ports
GTIN: 00193564557124
| Piston Series | |
|---|---|
| Cylinder Head | |
| Bore Diameter | |
| Piston Head Type | |
| Compression Height | |
| Piston Volume | |
| Piston Material | |
| Piston Quantity | |
| Forging Type | |
| Piston Average Weight | |
| Ring Set Included | |
| Ring Set Part Number | |
| Ring Quantity | |
| File Fit | |
| Top Ring Radial Width | |
| Top Compression Ring Thickness | |
| Top Ring Facing Material | |
| Top Ring Material | |
| Top Ring Shape | |
| Second Ring Axial Height | |
| Second Ring Radial Width | |
| Second Compression Ring Thickness | |
| Second Ring Facing Material | |
| Second Ring Material | |
| Second Ring Shape | |
| Oil Ring Axial Height | |
| Oil Ring Radial Width | |
| Oil Ring Thickness | |
| Third Ring Facing Material |
Years
2024
2023
2022
2021
2020
2019
Show All
Makes
Harley-Davidson
Models
FLHTCUTGSE CVO Tri Glide
FLHTKSE CVO Limited
FLHX Street Glide
FLHXSE CVO Street Glide
FLHXST Street Glide ST
FLTRKSE CVO Road Glide Limited
Show All
Instructions: Enter a value in the un-shaded boxes below as they pertain to your engine.
Note: For pistons BELOW the block @ TDC – value in box must be a NEGATIVE number (-0.000)
Note: For pistons ABOVE the block @ TDC – value in box must be a POSITIVE number (0.000)
Note: For a DISH piston – value in box must be a NEGATIVE number (-0.0)
Note: For a DOME piston – value in box must be a POSITIVE number (0.0)
Note: Manipulate the DOME/DISH & PISTON to DECK volumes to get the ratio you want.