Notice: Product Images may differ from the actual product. Image may be a representation of this item.
JE Ultra Series Chevrolet LS Gen III/IV Piston – 4.130 in. Bore – 1.115 in. CH, -17.60 CC
SKU: 361732L
JE Ultra, Chevrolet, LS Gen III/IV, 4.130 in. Bore, 1.115 CD, Inverted Dome/Dish, Left Piston
Ultra Series forged pistons from JE are the industry’s strongest, most fully featured pistons available off the shelf. Offered for a wide range of domestic applications from LS to Big Block and HEMI to Ford Modular, Ultra Series pistons feature JE’s proprietary Aligned Grain Flow forging technology providing next-level tensile strength ideal for the extreme cylinder pressures of power adder engine builds. Equipped with custom level features including thermal barrier crown coating, skirt coating, gas ports, and more, Ultra Series are the ideal pistons for your boost-heavy or nitrous-huffing V8 engine build. As with all JE Pistons products, Ultra Series pistons are made 100% in the USA.
- Designed for Power: Every feature on Ultra Series Pistons are optimized to perform high-horsepower racing engines
- Aligned Grain Flow Technology: Exclusively available on JE Ultra Series, this proprietary, in-house forging process maximizes tensile strength to withstand the stresses of high-performance engine environments
- Skirt Coating: Reduces friction and wear on piston skirts and cylinder walls while simultaneously reducing operating noise, especially on cold start
- Thermal Barrier Crown Coating: This ceramic-based coating reflects heat into the combustion chamber, therefore reducing piston crown temperatures and improving exhaust gas scavenging
- High-Strength Wrist Pins: Premium thick-wall wrist pins are manufactured by Trend Performance in the USA and are designed for the demands of high-performance/power-adder builds
- Lateral Gas Ports: Help maintain power-producing ring seal at the top compression ring, even in high RPM and high boost situations
- Optimized Pin Oiling: Enhanced pin oiling features keep pin, pin bores, and small-end lubricated for reduced heat, friction, and wear
- Made 100% in the USA
GTIN: 00193564200198
Piston Series | JE Ultra Series |
---|---|
Cylinder Head | LS 12 DEG/15 DEG COMBO VR |
Bore Diameter | 4.130 IN |
Piston Head Type | Dish |
Compression Height | 1.115 IN |
Piston Volume | -17.60 CC |
Piston Material | 2618 |
Forging Type | FSR |
Piston Orientation | Left |
Ring Set Included | No |
Top Compression Ring Thickness | 0.0475 IN |
Second Compression Ring Thickness | 0.0600 IN |
Oil Ring Thickness | 0.149 IN |
Wrist Pin Included | Yes |
Wrist Pin Material | 9310 Nickel Carbon Steel Alloy |
Wrist Pin Outer Diameter | 0.927 IN |
Wrist Pin Length | 2.250 IN |
Wrist Pin Wall Thickness | 0.200 IN |
Wrist Pin Retainer Included | Yes |
Ring Set Thickness | 1.20 MM x 1.50 MM x 3.00 MM |
Makes
Engines
Instructions: Enter a value in the un-shaded boxes below as they pertain to your engine.
Note: For pistons BELOW the block @ TDC – value in box must be a NEGATIVE number (-0.000)
Note: For pistons ABOVE the block @ TDC – value in box must be a POSITIVE number (0.000)
Note: For a DISH piston – value in box must be a NEGATIVE number (-0.0)
Note: For a DOME piston – value in box must be a POSITIVE number (0.0)
Note: Manipulate the DOME/DISH & PISTON to DECK volumes to get the ratio you want.