Share |
HONDA 1992-96 PRELUDE Si & 1997-01 SH PRELUDE H22A

  • MUST SLEEVE BLOCK
  • 2618 T6 high tensile forged aluminum
  • NEW ASYMMETRICAL FSR forging! State of the art asymmetrical skirt technology reduces friction and mass while providing a more rigid and durable platform (Skirt Style F).
  • In this environment, higher boost levels or heavy nitrous usage necessitate JE's wrought 2618 alloy.
  • FSR pistons include offset pins for quiet operation.
  • Dished pistons feature new Smooth Finished Crown process for excellent flame travel.
  • 1.0 x 1.2 x 2.8mm ring widths
  • .866 x 2.250 straight wall carbon steel wrist pin provided.
  • Pin fitting, rings and wire locks included
  • Compression ratio calculated at -.010" deck clearance & .040" gasket
H22A - NEW ASYMMETRICAL FSR FORGING
Note: Must Sleeve Block
Part # Bore Oversize Stroke
(mm)		 Rod
(mm)		 C/D
(mm)		 Head CC's C/R With .040 Dome CC's Gram Footnote Skirt Included
Ring Set#
298731 87.0 STD 90.7 143 31 53.8 9.0:1 -5.5 319 G,N,T F JG1004-3425
298732 87.5 0.5 90.7 143 31 53.8 9.0:1 -6.2 323 G,N,T F JG1004-3445
298733 88.0 1.0 90.7 143 31 53.8 9.0:1 -7.0 327 G,N,T F JG1004-3465


H22A - TRADITIONAL FULL ROUND FORGING
Note: Must Sleeve Block. 208475 & 253988 use 1.2, 1.2, 2.8mm rings.
Part # Bore Oversize Stroke
(mm)		 Rod
(mm)		 C/D
(mm)		 Head CC's C/R With .040 Dome CC's Gram Footnote Skirt Included
Ring Set#
166036 87.0 STD 90.7 143 31 53.8 10.0:1 .7 322 G,M,N,V R JC0004-3425
166035 87.0 STD 90.7 143 31 53.8 11.7:1 11.3 354 G,N,U R JC0004-3425

- Denotes part # has been issued a new part #. A list referencing old part #s to their new counterparts will be available shortly.

JE Pistons 15312 Connector Lane - Huntington Beach, CA 92649 - Sales/Technical Assistance | Careers @ JE
Copyright © 2013 JE Pistons Inc. All Rights Reserved - Use of this site is subject to the following list of Terms & Conditions.